Re: either/or...........
Re: either/or........... -- whisperer	Post Reply	Top of thread	Maverick Message Board

Posted by: tom mulloy ® 2001/10/05, 08:15:07 Author Profile

: So it would make sense that if you were to use the post 4/5/76 control valve, all you would have to do is replace the hoses with the matching ones. (or visa-versa......... *G*). - - - Right. However, I just looked at my newer control valve, one of the hoses has o rings, one is flared! I think someone may have used the wrong hose. Another thing, the ram will be different (O rings vs flares). BTW, if you look at the "holes" in the two types of control valves, the difference is obvious. Oh yeah, the pressure inlet in the pump also has the O ring design. From what I can see by looking at the parts, none of the later stuff interchanges with old parts. Charlie Ping may have something to add, he's done some Hollander research on parts interchangeability. Tom

Post Reply | Alert

Original message Top of thread Return to the MMB