| Re: Does anyone make a plastic cowl cover for a Maverick-Fall is coming!! N/M |  |  | |
| Re: Does anyone make a plastic cowl cover for a Maverick-Fall is coming!! N/M -- Mike McMaverick | Post Reply | Top of thread | Maverick Message Board |
|
Posted by: Ken Merring ® 2001/09/04, 00:31:13 Author Profile |
...Mike, The right half of the grill has the wiper drive coming through it. It would be difficult to have a good looking cover, but it could be done by some mfg. Looked at my car and think that a thin flexible sheet of plastic type material from a supply house could be slipped up under the windshield trim and sealed down with silicone sealer under the edges. Remove the wiperblade and cut a hole in the sheet and seal around the raised part of the wiper drive area. Hope this may be of help as last resort.
Good luck, Ken |
| Post Reply | Alert | Original message Top of thread Return to the MMB |