Heavy duty arms

Do they make maverick heavy duty control arms? I bought some control arms. Last year the bad already. I do have rims on it but still you think the would last a little longer. :16suspect

 

whats bad about them?

 

the only way for controls to go bad is being bent, or are the bushings worn out?

 

Bushings bad and ball joints bad. Do u think by Kyb shocks an rims could do that

 

You refering to upper or lower control arms?
What size wheels and offset are you running?
What brand of parts did you use when you replaced them?

 

A number of places make aftermarket control arms, both uppers and bottoms, but they are very expensive..................around $500 for a pair.
https://www.cachassisworks.com/c-809-upper-control-arms.aspx
http://www.globalwest.net/mnr-73.html
If you bought these a year ago new and if both are going bad I'd say you have other problems.
What kind of rims and tires do you have in front................?

 

If the balljoints and bushings are bad in just a year, and assuming you haven't driven a 100,000 miles this past year it sounds like a radical mis-alignment problem, which i would've expected you definitely should of felt while driving

 

I have sloppy steering. An thought It was just bump steer. Till it starting making noises.

 

did you check your tie rods? are you running power steering or manual steering? if manual, do you have the proper center link?

 

This is what I bought.

http://www.laurelmountainmustang.com/products/1970-1972-maverick-steering-and-suspension-kit