Separate names with a comma.
I have recieved enough positive feedback on these so I have decided to start offering them. All my signs are made from American steel. I use...
For starters it’s not a v6
Champion 3 row. Between radiator and WP pulley I have barley 3 1/2 inches
Id consider the Taurus fan. but two things. I dont think I have the clearance even if I flip it upside down. 2. I dont wanna change my relay...
So took the car on its first distance Cruz since the aluminum radiator and electric fan mod. 3 row champion, 2800cfm fan. 140amp alt. New...
How many would like to see these be in production?
I believe I can just drill and tap my housing and put one in it
The wiring issue is fixed like stated above with the new thermostat pic I posted. I'm just trying to figure out why my temp gauge stopped working
Basically what I did. It's not hooked up together anymore. Did I damage it ?
I have my wiring ran fine now. But now my temp gauge isn't working. I used a thermo stick and kept checking the engine. But the sensor never...
185
70 maverick. Not a grabber! by Richard Kuss posted Dec 12, 2014 at 10:29 AM
I looked online for a few hours. Only 90degree one I found with tapped for sensor was the mr.gasket chrome one. Alot of bad reviews on chrome...
I ended up ordering this to give it a try. Should solve my problem from what I read and heard online.
A tee?? and yes I said once I took the rely wire off, it worked fine
I realized that. I'm looking into aftermarket Stat housings that are tapped for sensors
Finishing up my electric fan relay conversion. New problem. I have the relay wire and temp gauge wire to temp sensor. If both are connected to...
Interesting
