Separate names with a comma.
Below are a few pics of block prep and head prep. Front oil galley caps getting converted to plugs, sharp edges in the main saddles and lifter...
Looking forward to seeing you get that running Bryce.
If I saw that chop top at a cruise in or car show, I would be making a bee line to it to check it out. I wonder how many inches were taken out,...
Ricky, did you put headers on that or just run manifolds? I cant remember if you put headers or just manifolds on your cougar. BTW, did you ever...
I have not updated this in a real long time. 4 months ago I bought a complete 98 explorer engine for the short block. I sold the heads and some...
Lol....I see mistakes I have made and ignore them.......:facepalm::facepalm::drool:
Rick, your post was 3 years ago....you any closer? lol.
I looked at a picture of the inside of that pan. Is what they are calling a crank scraper close enough to the crank to scrape it? I am kind of...
I am planning to raise the piston top into the open chamber of some 2v heads on a 302. With the right combo of grinding, 289 rods, head milling,...
I used to look at these types of conversions as overkill....but I have come to appreciate them the longer I am stuck in 8.2 deck prison. Good for...
Welcome from Oregon. I have only been to the drags once....but am going to get a trac loc and do it again! As far as I'm concerned, it is FUN!!!!
I would love to hear about said schemes when they are ready to be revealed. I keep running in circles with my own evil Clevor schemes.....but am...
I went close to the frame and up and over the shock tower between the shock and fender. I cut and slit short pieces of fuel line to wrap the line...
These cars are amazing. Stock distributor though? crazy RPMs
I ran my metal trans cooler lines from the transmission, up and over the shock tower, under the battery tray, and switched over to rubber to make...
Welcome. Please tell all when you know, lol.
How fast would that thing have gone if it were 500 pounds lighter? I dont know what the real curb weight was for those, but one post put it at 3,417.
Update....After discovering a 79 F250 at my local P&P with what appeared to be rebuilt heads(351M), I decided to pull them off and buy them to...
And if we are talking 1/4 mile, dont forget about Bob Glidden's Cleveland headed, undefeated Fairmont. I am sure he had a special way of massaging...
My 302 has a performer RPM, 600 Holley, GT 40 heads, Mustang GT roller cam ( 210 duration, .444 lift) about 9.9:1, hooker 6901's, 2 1/4 duals into...
