Separate names with a comma.
I'm getting there Bob, I need a new gas sending unit, wheels/tires and a front end alignment. In the mean time I will double check things. I...
:yahoo:I ( WE, THANK YOU GREGMAVERICK ) GOT THE REVERSE LIGHTS TO WORK!!!!!:yahoo: 10 Volts Now all of the lights are working. man those dash...
so should the black/red wire and the yellow/black wire be together/connected
OK, so I thought it was going to be easy, got up under the dash and found a group of 3 wires, yellow/black, blue/red and black/red. None have...
You're correct in the sense it came off. It's not installed yet. I will temp install it and see what happens. Thanks for the knowledge, greatly...
I cannot figure out why I'm not getting power to my Reverse switch. I've unplugged the switch and checked power at the connector...NO POWER....
https://kpr.craigslist.org/cto/5833567928.html its on the other end of the country from you
get with junrai, he's parting out a 71 grabber he has/had one. http://www.maverick.to/mmb/threads/parting-out-71-grabber.106866/
http://mmb.maverick.to/threads/installing-5-piece-rear-grabber-spoiler-set.84202/ I used the instructions from the tech articles, great instruction.
Ammonia free windex You are correct, use the Ammonia free Windex
Try a Mr Clean dry eraser with windex
It does not have bolt on rear cover, the tag says 8.8 on it though...was told the Ford had two different 8.8 rear ends...not true?
I did not need to modify it and have no idea what was done, it bolted right in though, I did need the springs. I don't know where it originated from.
I took a 8.8 from a 74 Maverick and installed it into my 70 Maverick,. Put vehicle on jack stands under frame and let the rear end hang. Put a...
Well, you see there is only so much thread before it bottoms out
Be careful not to over torque, they will snap...don't ask why I know this :(
:grpnanadance::dancingpa: IT WORKED! Switched the hoses and ran her up, turned the wheel and got the air out. No leaks and no apparent damage...
Nothing to report yet, the "work" thing keeps getting in my way. I will work on it tomorrow morning, Thanks for your interest, I will post the...
I will get on it tonight guys, thanks for your help. I will let you know of the outcome.
OK, 4 guys that had the same problem. I will reverse the lines and see what happens. Does it matter which end I reverse/swap?
