Separate names with a comma.
Glad to help. Rick was a big help. I purchased a Cougar controller for the sequential LED taillights I was making. This was several years ago...
Not knowing exactly what headlights you are using and how they are wired, I would investigate if this is your problem. The owner of the Cougar...
I used LEDs for all my side and tail lights. The design of the Ford lighting circuit used the bulb on the opposite side marker as a pathway to...
Be careful with it, they break easily.
I did mine very similar to Jason. Pictures in my build. Micah
Something to consider, you might be able to get an NOS one. I got an NOS engine compartment one from Green Sales a few years back. It did not cost...
It was a bit of work for me to graft those '74 belts into my '71. I had to cut up the sill and floor. The upper mount had to be welded into the...
There is a picture in my build. Pretty much goes together just one way. Micah
I believe I got mine here: I selected red to match the exterior. I don't see it as an option now. Product Search | Auto Custom Carpets...
Those look like '69-72 cars. Some of the best years for sales. Sorry, but I have a hard time thinking they just sat around for years. Micah
TMI Products
If you go through the article you will see a picture of a Boss Maverick. Micah
You can get a glimpse here: Ford Mach 2 Concept Micah
Rebuild an AOD instead of the C4 and go with 3.54 gears. Micah
In your first post, mentioned that the motor was clean. So, I'm not sure if flushing is going to do anything. Considering the unfortunate...
I would look to confirm TDC on number 1 with your dampener. Micah
What do your spark plugs look like, how accurate are your timing marks and what is your timing set at? Is there any advance or retard in your cam?...
I do not see where you have confirmed that a reverse rotation water pump has not been installed. Micah
A thermostat not only regulates temperature but restricts the flow so that the coolant has time to dissipate heat. You need to determine if you...
I used a silicone sleeve and then an aluminum shield from DEI. I have not had any heat related issues. Micah
