Separate names with a comma.
How much did it cost?
Nice!! Didn’t know he made a comet one.
Put in a new 200 amp alternator, and took some time to redo some of the wiring. Now to figure out why the AC system is short cycling at highway...
Here is some photos of the metal style. [ATTACH][ATTACH][ATTACH]
That was actually made by a guy local to me. He built the car for drag racing.
Looks fantastic! What did it cost you to get a set from Fred?
That is fair. The roller style are definitely an investment at $200. They are well worth it but they are pricey.
I ordered the adaptor cables for the stock controls. Fits no issues at all just need to flatten and drill one of the brackets.
The center vent I used AC tape to attach it to the piece. They are different sizes but it worked. (No photo) For cooling I have an aftermarket 2...
The whole install was relatively straight forward. Tip for anyone who decides to retain stock controls. The 76+ fan Controller is the same pattern...
If you have it that far down invest in some roller spring perches. Such as the open tracker version. Well worth the money and noticeable difference.
Finally got around to installing the system. Took a bit of work, a lot of frustration but finally got it working well. For the longest time my...
No problem at all. I’ll post some side by side photos in a week or so when I get over there. The latches are made of pot metal. I was surprised...
I haven’t gotten a chance to find a set of the metal latches yet. They are at my other storage area. Here is a photo of the inserts. The early one...
Worked on finishing the AC in my car. The electric fan doesn’t have enough CFM to cool the condenser. Might pull my Taurus fan off the shelf.
Always did love those South American tachs!
The early latch was metal which was 69.5/70s. The 71 latch was plastic. The metal latch used the smaller cover and the plastic one the larger one....
They are actually 73+ factory mags. Very similar to Indy mags but the factory mags have the recessed painted circular line.
Those are factory aluminum mags first available in 73, in 74 the center hole became slightly larger to accommodate disk brakes. They usually go...
Post a photo of it, is it an original or one made by joe?
