Separate names with a comma.
72 Maverick sprint. I am putting my dads old car back together. The tank that I have is very close to the rear valance, I don’t remember them...
Got TBM F3 on the rears now. Finished that up earlier all except the hoses. Fronts will be ordered probably next week, then I get to go racing...
I put Aerospace on mine a decade or so ago. I don't run the car much, maybe once a season if I'm lucky. The calipers stick. On their own. They...
waving, from the conway area
If I was to build a street race or no prep car, I'd just as soon run to the junkyard, grab the cheapest ugliest rear drive car I could find, don't...
Weight has a lot to do with it. Just as we lighten up our cars to make them faster, a lighter car also stops faster. I put Aerospace on mine;...
Modern era muscle cars have independent rear suspension. IRS DESTROYS a solid axle in the traction, handling, and comfort departments, so long as...
What are you going to do with the car that would potentially get the canted 4 link (aka triangulated)? Here is my thoughts, for what they're...
Grab a sheet metal screw. Not the self-drilling kind. Turn the screw down into the little filter until it's hard to turn (by hand of course)....
It differentiates the US 302 from the Aussie 302, which used cleveland heads as I remember. Basically a Boss 302 but IIRC, had the smaller 2v...
IMO, don't mess with the heads...easy to screw up, then you're back to square one again. Keep your $1000 leftover for fluids, filters, that kind...
The pro stick is a good'un. I think all 3 of our cars run one; mine being the oldest, bought it in I think 1992 or 1993. Same shifter, only...
Yeah it was like that here yesterday. One minute no wind. Next minute, tail wind. Then a few seconds later, a head wind. Certainly makes...
True, but keep in mind that seasoned bracket racers aren't usually bothered by a large spot; so don't run out there with a 20.00 dial and expect a...
I use the shocks too. Problem I run into occasionally is that making the car "faster" by small adjustments sometimes also affects my own personal...
Solid motor mounts are no problem; as I've run motor PLATES (no block mounts) for eons now. Dad and I both have. It ties the engine to the...
You made a wise choice. Speaking for myself here, but if I am buying a core engine-one that I expect to have to overhaul/rebuild, it better be...
Trial and error, my friend. I've been feet braking for, what? 25 years off and on (more off lately). And I still ain't got it figured out....
Gotta watch the hi-ports, they're similar to the Yates C302/C3/D3 stuff in that there are some different versions floating around. There were a...
They come right out of the box fully CNC ported, chambers included. They flat work. They come with decent valvetrain, although the springs are...
