Separate names with a comma.
I took 2 1/2 inches out of mine. I chose this amount because it still clears the side marker light. It is simply a matter of taking whatever...
Going to a smaller diameter master cylinder helps a lot. I ended up with a Wilwood master cylinder, which I believe is 7/8" diameter. I also have...
Is anybody going to be at the Woodward Dream Cruise this week? I expect to be out there every night this week and all day Saturday. If anybody...
I built my car as a sleeper and is stock on the outside. I love my 421 (stroked 351W) and have had it in my car for 15 years. It peaks out about...
Yes, I had this problem too. Took it to a muffler shop and had them modify the one tube that was a problem. Works fine now. Lee "THE MAV" Richart
I've had my Borgeson unit for about three years now and am very pleased with it. One thing I did to get the amount of positive caster they want...
I've had a Borgeson conversion for several years now and am very pleased with it. Definitely use a manual steering drag link. I am using the...
Yes, I have the GC on a C4 behand a 421 Windsor. It is a great little sleeper. I went with the GV because I had a lot of money already invested in...
I guess I am no gentleman then. I've had form fitted mud flaps for years. They keep the burnt rubber off the rear quarters and the stone chips off...
I have headers by Tubular Automotive on my 421W. Autokrafters is one source. I had to caress a couple of tubes with a ball peen hammer to make...
I have a Jegs brand mini-starter on my 421W stroker motor and am very pleased with it. The original starter didn't want to crank that big motor...
I got married the same year my 1973 Maverick was built. Makes it easy to remember my anniversary. Lee "THE MAV" Richart
Does anyone know where I can get a rh side rectangular chrome mirror for an LDO? It does not need to be remote control. Thanks, Lee "THE MAV" Richart
I also did 2.5 inches on my 73. I think it is just right. Lee "THE MAV" Richart
Somebody needs to start a LDO forum. Lee "THE MAV" Richart
Say no to the C6. I have a beefed up C4 behind my 421 Windsor with no issues in 11 years. I am making about 450 horsepower. My son has a Comet...
I agree with Frank on the rear wheel width. Also 8" is too wide for the fronts. For the 75 series 6" would be adequate and 7" would be max. I run...
My Wilwood setup came with very good simple instructions. If your mechanic doesn't understand them, then I would do what Frank said. Lee "THE MAV"...
I am running 215-60x15s in the front and 255-60x15s on the back all on 15x7 wheels. with no clearance problems. Anything larger than that and you...
