Wired up front and rear seat warmers in preparation for putting the new interior in.
Spent most of this afternoon upside down stuffing wiring and heater controls up into place. Pay no mind to the steering wheel, it's soon to be redone.
Slowly painting the jambs while waiting for firewall insulation. Ordered through autokrafters back in October and still isn't here. I guess Quiet...
Yes, try not to pry the metal too much and bend the flanges all out of shape. If you do it may result in a cowl that sits lower compared to the...
I would be leery of whoever you get to fix that because it looks like the middle brace is bent as well. Make sure in the bid that they are going...
So I'm sitting here reading this and wondering if your car has a duraspark (ignition) module.... if it does you might want to check it or replace...
I just did mine a couple months ago. If you have a decent welder, some sheet metal, and a bit of time, you could build the rusted out areas. I'm...
I had a 67 mustang shipped from Illinois to Oregon last summer while it was taken apart. I didnt have to arrange the shipping for it but I did...
Does your car have factory ac? If it does I may have some pictures to help you out. I just recently rebuilt mine and it's not back in the car yet...
Those are 2 different parts. The luxury decor w/ jute from factory is a sort of thick tar paper with a jute backing.... im guessing for more sound...
Filing it should be able to make it work as long as there isn't a visible gap where you can see into the bell. The less dirt in there the better....
Thankyou Hotrock! Glad to be here. Yeah looking back now "insane" comes to mind.:rofl2: Constable, unfortunately blasting it wasn't in my...
Yeah I definitely could have found a better one, but seeing how much the last owner loved it, I couldn't resist taking it on. I come from an auto...
Hey everyone! Long time lurker, first time poster. I figured I'd let everyone know that a 74 Comet is being saved frome the scrap yard! 1974...
Separate names with a comma.
