Separate names with a comma.
Thanks all. When she gets to Florida with the car, I'm sure she'll have it at tons of shows. I'll get her to sign up here so she can stay in touch...
Once home again, I installed the chin spoiler, trim, and reassembled the car. My upholsterer buddy knocked the interior out of the park, and the...
One of my friends let me use an old defunct MAACO body shop booth downtown to shoot the car. He's a very talented body man and had much nicer...
As you can see, most of the work was done outside.
At that time, I obviously realized that I had trusted a bunch of idiots to save my daughter some money and restore her car. They had seemed very...
My buddy and I helped the body shop on the show disassemble the car and start some of the bodywork. I wasn't able to stay on the project past that...
This summer, a TV show that has been covered heavily in other threads, attempted to do a Shelby version of my daughter's 1971 Grabber Maverick....
Ray, your car was definitely the motivation for her love of Shelby tail lights in a Maverick. She wants to get the chin spoiler and window...
Those pics were very helpful. I wasn't sure how the panel fit until seeing that thread and Dave B's pic. Thanks!
I started my daughter on mavericks when she was 15. We built a 72 and she drove it all through high school. She's stationed in Alaska in the Air...
I found the loosened band bolt and lock nut while pulling the trans. I set the band back again, then put everything back together. The trans works...
I was checking out the trans and found one of the band adjustment screws had loosened itself out about an inch. The lock nut was still on, but...
The car leaves in 3rd, and stays in third. I haven't even raced it yet, but the motor and trans have about 1000 miles in them. Ace Motors in L.A....
I have an early c4 with a green dot cruise0matic valve body, 1000 miles on a new rebuild. The trans worked fine when suddenly, it stayed in 3rd...
Currently it has a 523 cu. in. SCJ, C6, 4:11's. I just put it in, still finishing the swap. I ran a stroked small block for the last 14 years,...
O.K., here it is.
Here's another shot I found. Also, I checked out Byron's Gasser Madness and saw that white Falcon you mentioned Actionrpm. I remember seeing it...
I don't know a white 60-62 with radiused rear wheelwells. There are a lot of Falcons around here, though.
I go every year, too. I probably saw you running that awesome Willys. I'm usually in my 57 Ford, but might race the Falcon this year. I really dig...
It ran low 14's in the 1/8th. They weren't running the full 1/4 because the track was wet from rain that day. It was at Thompson Drag Raceway....
