Separate names with a comma.
3 of the 6 screws of the mains were brocken ( 1 each main)
broken srews in the mains
at the small shop to make a full check
this is how the car looked at the beginning when i bought it. it has a few details but lookds nice from a few meters. its a 74 with 70 front...
hi all i already presented me and my mav in the new members forum. (http://mmb.maverick.to/showthread.php?t=94543) i bought it in march...
disassemble cluster. need new plastic parts, mine are rotten. the new one will be painted, new leds and reinstalled...
electric made by preowner, will be replaced completly!
old rear end DANA 44 vs. new rear end Ford 8.8
my old engine for sale! 1974 Mexican Block (thicker mains, thick casting), changed camshaft (spec unknown), Edelbrock waterpump, Edelbrock...
the cut out rocker metal
the other side rocker is even worse and waiting to be cut out
fuck my preowner. he put glassfiber over the rotten metal that i couldnt see how bad it is underneath. i wouldnt have bought it if i could have...
the cut out rocker (rear)
the cut out rocker (front with torque box)
the car on the lift with the cut out side rocker (complete)
new battery tray (but the battery will go to the trunk, so it will be the place for the MSD box)
the new gas tank out of the car
new mustang gas tank replaces the rotton trunk floor sheet metal (more volume gas tank, but put in from above which makes the trunk alittle smaller)
new made frame rails welded in
floor pans inside with seat boxes
