I too am disappointed with the current lack of good motor mounts. I tried some trick adjustable ones made for Mustangs and they do not fit. I'm...
I hate to bump such an old thread but the adjustable motor mounts for 65+ Mustangs do not work on a Maverick, do not buy them. The four side...
I would say yes. I found an aluminum fabricated front sump on ebay for $200ish. It has more clearance than stock pans. I'm also getting a...
I had this guy do mine: http://www.henselsgearage.com/ Great work, good price. His name is Dan and his shop is in Ohio, tell him Scott sent you!
Joe, can you list out what would need to be done to make the th350 live a good long life (measured in years) for a driven a few times a week easy...
I could be swayed to use a th350 I suppose, I bought books on building both. I'll really have to do my homework on the tranny. I looked at...
Hi guys, after hearing first hand the success an internet buddy had with his turbo LS swapped Fairmont I believe I'm going to go turbo LS too...
What do you guys think of this combo? Still working on the exact cam, this would be a "budget" street/strip motor (hypereutectic pistons/cast...
I hear you about $$$ olerodder. I just want to build my motor once! If that means more money (ie longer time to save up) and/or less hp, so be...
I honestly think I'll be a-ok with an engine built around a stock 351w block, even a later hydro roller one. To get 700whp I think I'd need a set...
When does the 351w split then? 700hp+?
Maybe if I had a 5 speed it would be more streetable. Sounds like a 351w stroker is the way to go. I know it's not going to be cheap. I already...
It's probably been asked a million times but... I've been wanting to go 351w stroked but would also consider a 347 for easier fitment. I'd use...
I like the idea of shorter slicks at the track if needed. I had short slicks on my other car and went from a 3.55 to a 3.94 final drive and it...
What kind of rear end gear would you guys put in a streetable 408-427w powered Maverick with a C4? Probably would have a big hydraulic roller cam...
I can agree with you, speed costs money, just depends how far he wants to take it. I want to do a 408w with about as big of heads "out of the...
Crites must have started making their own, they look much different than Tubular. Plus Tubular are 1.5" tubes and Crites are 1.75". I think the...
Love that blue! Car looks good.
Anytime you're dropping 10lbs of engine into a 5lb car you're gonna have compromises. The Crites are cheap considering ($370 plus shipping) and...
In my opinion Crites makes the best "off the shelf" 351w swap headers. (off the shelf is used loosely,they are made to order). They need six...
Separate names with a comma.
