Separate names with a comma.
To answer some of the questions the camshaft we have is a Solid Lifter COMP Cam but we can't remember the duration or lift and can't find any info...
ok but we don't have power valves we just have block off plugs cause of the way are motor is set up but didn't know if we should be the power...
i have a 1979 Mustang with a 1969 302 Block and Boss Heads with an Offenhauser Tunnel Ram. we have 2 holly 600 cfm carbs with vacuum secondaries...
we fixed the problem with the idle the fuel bowl levels were to low we fixed it and it still bogs down when the fans kick on but still idles good....
it is a 302 block that had a hillborn fuel injection system on it then my dad got boss heads and put on it with a tunnel ram. so it is a 302 block...
i was wondering if u could help us. we have a 1979 Mustang with a 1969 Boss 302 motor in it. the motor has a offenhauser tunnel ram with dual...
they operate at the same time
i need help tunning dual holly 600 cfm carburetors we can't get them adjusted right so the car will idle. we baught power valve block off plugs to...
i know it won't run perfect but we know it will run to where we can drive it we have had it there before. i just need help on how to tune dual carbs
i need help on tunning my holly 600 cfm carburetors i have two because i am running a tunnel ram. we need help on how to tune the dual carbs so we...
wat is better the holley 450s or the edelbrock thunderseries 525s
we are going to buy either the holly 450 carbs with mechanical secondaries or the edelbrock thunderseries carb wat one is a better carb to get we...
ok thanks we will try that and i will get back to this when we find out thanks
we can't find the paperwork on it and don't want to take it apart and thanks for the info on the lifter
i have a Solid Lifter Comp Cam and was wondering if there is anyway we could find out wat lift and duration we have without having the paperwork...
thanks for the help we are going to work on it some this week and if anyone has anymore info on wat we could do with a tunnel ram plz reply.
thanks for the info and if i was to keep the tunnel ram wat carbs would be the best if i cant keep wats on it and i need help tunning
it is a 79 mustang that had a 4 cylinder in it my dad blew the 4 cylinder and then he got a v8. the engine is not all Boss. it is a 69 302 block...
my dad has a 79 mustang with a Boss 302 it has an offenhauser tunnel ram on it and we have 2 holly 600 cfm carbs with vacuum secondaries. we can't...
