help with cam specs?

I pulled the cam out of my 72 maverick ,I didn't build this 302 so don't know a whole lot about the internals but I decided to put a mild rv cam in place of this rough idle cam since it sees a lot of stop light traffic anyways I been trying to figure out what the cam spec is for this cam u just pulled out ,I was told it might be a blue racer cam flat-tappet this is the numbers I got off of it 960095 if anyone can help me find anything out I would be grateful ,i might can sell it to someone

 

Check on Crane cams website. That sounds like one of their part numbers

 

thanks I will try again but have already been on their site trying to find it,thats what I thought as well about the numbers,i will keep searching

 

its not on the crane web-site ,sure would like to know the specs on this cam but ive looked everywhere trying to find it

 

If you have a dial caliper, you can measure the lobe lift and narrow it down some.

 

don't have one but thanks

 

Buy one. They're not that expensive. I bought a couple from Midway Arms for $15 or so. It's a handy piece of measuring equipment.