Yes. I used a new later style tank. I cut out some of the material at the top of the tank and had a flat area welded in. If I had to do it again, I may have used their panel. There was barely enough room to get the hoses and wires through where the old vent line ran. http://www.tanksinc.com/index.cfm/p...ct_id=370/category_id=61/mode=prod/prd370.htm Micah
I would say install a vaporworx kit with camaro/vette pump or aeromotive phantom kit Both will address fuel slosh and pump captivation
on my 70 modified the tank with pump inside. but never installed a baffle so left turns suck. anyway tired of the slosh issue so I just bought a 20gal aluminum fuel cell thats in the mail and im buying an aeromotive pump from summit and be done with it.
