I am looking for a few very particular pictures. Long story short. My car started out as a 74 Maverick, Im tossing in some 69 maverick stuff such as the ignition switch pod. Well anyways id like to see the Factory mounting location for the pod as well as a picture of what the connector for the pod looks like since im in need of the harness for it ( if anyone has a spare please let me know) Also I need a picture of how the lower dash tray mounts with the upper portion of the dash if at all possible. Also I have bucket seat tracks, If at all possible can someone get me the dimensions for them? (Ill admit I did not do a search of the dimensions and im sure they already exist on here somewhere. Also Does anyone know how to take apart the ignition pod? I have the key cylinder out, but am unsure as to the how to remove the electrical portion from it. ( trying to take it apart for paint reasons) Any and all advice is welcome. (Already posted in wanted sections but im looking for the following) 1. Sport Lamp switch Assym. with bezel 2. Harness for the 69 1/2 ignition switch
You can buy the wire pigtail brand new for $20 I think. We just finished doing this do my buddies car. We will be doing mine in a few weeks.
Your the same guy I met down in ocala at the go kart track. How have you been? Also ive been trying to find the harness. closest ive found is for the 68-69 Mustang. But it looks like the prongs are slightly different, unless its just the picture. http://www.cjponyparts.com/scott-drake-ignition-switch-wiring-pigtail-1968-1969/p/HW3125/ If they are different, can you by chance get me the part number please?
part number C8AZ-11573 http://www.parts123.com/parts123/yb...~S4YX19II1X10870122650g~Z5Z5Z5~Z5Z5Z50001018o
Been doing good, the above link is the correct one and will work fine. The wiring is fairly straight forward and you can splice it into your current harness
I am going to do the same mod. I'm going to a after market steering column that doesn't have a switch...
Im modding my column out of 2 or 3 other ones. I wanted to go with an A/M column but this project has been going on long enough and I want to kind of make it look factory still. (All thos little mods that almost look like something the factory would have done.)
