ok so what do you guys think about the gt40 heads? i had a huge problem with the heads for my car because i had someone else dealing with my machine work because he had a friend that worked at a machine shop and he said he could get me a good deal and then he said the same thing about heads but he ordered windsor jr heads and then told me afterwards and i told him about the header issues and blah blah blah all that crap and i had told him that i was looking for aluminum either way so after 3 months and a bunch of different sets of heads apparently were finally ending up with gt40 heads. what do you think about these? edelbrock performer rpm intake comp cams xe274h speedpro hyper pistons edelbrock 650 carb bored 30 over and goin with 1.6 roller rockers
I like the P heads, except for the spark plug issue. I would swap them for non-P heads in a second. The flow numbers are pretty similar.
yeah i knew about the issues with the p heads those were one of the other sets of heads that came and went while i was in germany im starting to wish i had just spent a little more money initially and done it all myself it would be done 3 months ago and i think ive actually spent more money than i wouldve if i did it myself by now and im getting less and i have no clue what theyre out of the guy is really hard to get a hold of since i got back
I would not waste my time with these heads unless you were getting a deal you could not pass up. AFR or performer rpm's. I have the edelbrock performer rpm's on my 306 and would only give them up for the AFR's. I have not had a single issue with them. Fit perfect and work perfect.
yeah the problem is the guy ordered em without talkin to me first and the other guy wont give him his money back just another set of heads he has
I am not sure what I would do in that situation, however I have spent enough money on my car to know that if I don't like something it goes back... my money is very hard to come by. I would really try to get something you like. Good heads make all the difference.
yeah the problem is since it went through ebay theres not a whole lot that can be done we payed he gave what was ordered and aside from that theres nothin to be done and eventually ill probably resell these suck up the loss and buy some good heads
I have Iron gt40s of an 88 stang, they are okay... But I would trade up to AFRs in a minute :bananaman
so all in all did i get completely screwed or are they at least decent and with the rest of what i said what kinda power numbers do you think ill get with those and intake and hooker 6901s ported and matched and all
