The Rear composit Valences will have a prototype and pics out on 2/22/08,,, They are looking very good and could have a release date By the end of Febuary 08, ,, The Parts releases are starting to all come together and will be allot more Frequent,, We did start on many projects all at once,,, and they are coming out around or near the same time. The Chrome Boomerangs should have the Prototype and pics with in the next week,, :Handshake,, Please keep your Idea's and E-mails coming,, Soon all our parts needs will be a reality,,:bananaman Please send your parts list to,,,, RPS. www.restorationpartssource.com att. Tony ph. (510)786-2067 All of those looking for the Rear valence, Please let us know, we need to have an Idea for the first production run. Thank You Joe
Around how much are these going to run? I really need a front and rear valance and I'm sure these would be a lot better than trying to find a nice dent free original one.
I purchased a dent free NOS Valence for the tool makers and spent $250. on the NOS rear Valence. The Composit Rear Valences we are making will have all the Mounting screws and fasteners in with the part. Retail will be between $125. and $149. each ,, if The Production number of the first run is higher I can see the cost coming down,, we get a price break on higher numbers, and that sets the tone for all Rear Valences that Follow. Once the First run is set,, So the more that is ordered for that first run the better the price over all,,:Handshake Thank You Joe
I'll take one! I would also love a front one as well... They are on the list of things to make arent they?
I have a NOS front in a box in the attic if it is needed to make a template for the composite ones...
ill take one. whats the e-mail addy that i need to send. i checked the link above and the site is set up for outlook. i dont use outlook, so the actual e-mail address would be nice. I cant wait to have a rear vailance on my car. any chance of grills being made, either stock or billet?
The front valences are in the tooling stage,, but if the one we have is not perfect,,, I might need the one you have,,, Thank you very much for the offer,, It is greatly apreciated,, How is the car running by the way,,?
We are talking to a company to make new grills,, we also can have them chromed if desired,, they are about 6 months out yet,, try this number, ph.(510)786-2067 or try this site,,www.rpsparts.com
i'll have to say, good price! a person can't hunt and find and good used one these days for less than $100
Car was running GREAT, but not now... Took the carb off earlier this week, it has been disassembled, and soaking in cleaner until about an hour ago. Just blew the parts off after scrubbing them all clean, and am about to sit down and start reassembling it. It will be up and running again tomorrow or sunday. Thanks for asking
Sounds great,,, I have a few Carbs up here,,,, Needs some attention,,,,, Let me know how she runs,,,,,,
