floor pan??

does any body know if anyone makes new floor pans or an alternate route??
i just discovered how bad mine really are, and ive had no luck finding them.

any help would be appericiated
sorry if this is in the wrong place,
thanks, jamie

 

well 65-66 floor pans will work if you work them into place.

 

sorry thats mustang floor pans.

 

CJs Pony Parts sell repopped Mustang floor pans, and it looks like it is the same piece for all years 64-73 ...

http://www.parts123.com/parts123/yb...~S2FO0DRVD424967113216b~Z5Z5Z5~Z5Z5Z50000016e

They also sell smaller sections for about $30 each if you don't need the whole thing.

 

thanks for the info

 

i think i was told that the mustang pans go in with just a little cutting around the edges

 

What are those plugs for? Does anyone actually expect to flood their car and have to use a drain to let the water out?

 

I do on my CJ7

 

Jig locater holes.The holes properly locate the pan on a fixture so the rails can be welded on in the proper orientation during build/assembly.Afterward the holes are covered with a rubber plug or ametal plate and a couple sheet metal screws...mustang pans work... I put 65 mustang pans in my mav,trim the inboard edge off(tunnel side) untill it fits between the rocker and tunnel.The mustang had a wider pan than the mav.Also the pinch rail(lip at the rocker sideof the new pan)needs to bent upward if you want it to look correct, otherwise leave it alone and weld it to the rocker from under the car instead of inside the car.

 

i just bought a bead roller and a shrinker strecher, im gonna try my hand at fabbing.......:confused: hpe it works out for me lol