who says 65 stang pedals dont fit in a maverick. i did it and then modified it a bit im goin to use a cable setup for it. heres some pics more to come.
thanks for the comment. well after i removed the maverick brake pedal pin and arm i slide the clutch pedal in the brakect the factory 65 pedal pin is too short so i cut it off and drilled out the pressed end on the arm. i welded the maverick pin to the arm and welded the hole on the other end and its super strong then i cut off the factory spring holder since i would not be using it. then i bent the top of the clutch pedal arm at the pin area a 1/4" to make additional clearence. i then reinstalled the pedals and all done looks good. after i get the quadrant to weld to the top of the pedal arm ill show more pics. craig
