This weekend (Sat) i had to drive out to sign some documents about 30 miles from me and before i left i thought i should bring one of the extra calendars i bought along to give to my friend Tony who ownes a shop near were i was going . Tony rebuilds and collects mustang 11 cobras and king cobras. I give tony the calendar and we start talking about our projects we are working on ,i tell him that besides the 1/4 mile car im building a 69.5 street performance daily driver he says oh really, well then i have a gift for you. Tony gives me a complete rack in pinion set -up ,both upper and lower A frames,springs,shocks,upper and lower contol arms with a frame rail that goes with it and the power steering setup,disk brakes spindle to spindle from a 77 mustang 11 cobra car he scraped,all i will need is to buy is ball joints and tie rod ends ,Im going next weekend to get it as i was driving the comet and all this wouldnt fit in the trunk .Well thanks Tony
I was just being humorus...hence the smilies? Did it come accross wrong? I'm sorry if it did... When you get to be my age this is just ribbing. Jimmy did mention he likes to laugh too... again, no offense intended.
What good in a stock Mustang II front suspension? even if it is free?? It's not like it just welds in..
With this you could buy just the crossmember for a Maverick and make it a weekend installation if you are a good welder. If you try to use the stock crossmenber, you will have issues with width of the frame rails. Good luck!
