i want to get different door panels but theres a problem. heres what my drivers side looks like: is it possible to change the internals of the door so that the door opens from the small lever like the 73's had originally or am i gonna have to get a different door? i want to put on deluxe 73 panels and this is holding me up...
The doors on 73's can be made to use either style. There is a post that shows, how 73 doors have the holes for either style. I can try and take a pic of the doors on my Brown 73.
looks like it doesnt have the provisions for the 73 door mechanism... im not sure what to look for but it appears it wouldnt work. anybody know for sure? here's some pictures what are these pink things on the inside of the door?
That's not a 73 door (no rebar) and those pink things are bondo, squeezed through holes drilled to pull a dent.
I have a 74 Maverick that I can not get the inner door handle off of. How do you get it off to paint and fix the window? I have everything else disconnected and ready to come off.
if your talking about the lever in the first pic, theres a screw on the inside of the lever. just pull the lever out and look inside of it and you'll see it
i cut it out so i could check if there was a way to set up the 73 style door latch. JK somebody put a fake speaker
ok thanks! that makes sense now. the outside of my door has a nice and shiny section thats been repainted before and its right where that bondo is
my car has been hammered around quite a bit...the tail panel has a long dent in it from when the car was rearended, under my carpet there was a bunch of glass, the drivers side was hit hard enough that they changed the door and somebody put a cheap paint job in between all this...a lot of the paint is flaking off now
