9 inch rear end questions

I got under the car recently and noticed there were no rear shocks. the previous owner installed a 9 inch rear end but did not have lower shock mounts.. I found a 71 at junk yard that had the mounts but the hole pattern was too small... does anyone know of a compatible lower shock mount I can use to match the upper Maverick mount?? or can someone offer alternatives??
Thanks!!

 

Why not just weld a bracket onto the housing, or the spring plate?

Shouldn't be to difficult.

 

the 9 inch has thicker axle tubes. slot the holes on the spring plates until they fit.

 

Buy a Set of Lakewood traction bars, these have the shock mount holes in the lower plate that replaces the spring pads. The set I have on my 77 Comet is for a 67-70 Mustang

 

9 inch rear end issue

thanks for the suggestions!!