What kind of wheels are these.

What year width and backspacing do you think these are? These came on this toyota truck I just bought.

 

Look like late Mustang wheels to me. Will need wheel spacer for a Maverick.

Rick

 

Yep they are the Second version of the Mustang Bullit wheels. Size and offset would be for a 2005 and newer mustang. Dont know the sizes off top of my head though but you can probably get the specs off of www.latemodelrestoration.com where they have them for sale.

 

That sure is a clean '75 you have there. If it is anywhere near as clean as the picture makes it out to be, then, it is nice.

 

Thanks stroker. Its actually a 76. Would I need new wheel studs because the specs I found on these rims say they have over 6" of backspacing. I have 4" of backspacing now. Here is what I found. Mine have a ford logo and not the mustang one.

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=7868

 

they should have the size marked on the inside of the wheel.

 

Sorry stroker it is a 75 I thought you were talkin about the car the rims im talkin about is on. Its pretty clean. The guy that did the paint job after I wrecked it didnt do a good job at all. With stock wheel studs whats the biggest wheel spacer I could use with these rims? Thanks...

 

I think most now when talking about spacers are actually referring to the adapter spacer plates that have the new studs on them.

 

Try them first before you go buying spacers. I'm running wheels with 6" backspacing front and rear with no problems. Mine are 15 x 8, so that might make a difference....