for headers did anyone need to pull the engine to put them on? and what type of headers do you have, where did you get them at? thanks -Doug
I always used Hooker headers in mine and never had problems with them. If I remember correctly I would take the motor mounts loose and lifft up the engine a little and slide them up and in. Mind you it's been over 10 years since the last time I did it so I could be a little foggy on the exact process.
alrighty thanks man, my dad and i figured that we would have to lift the engine.......oh well what ever is needed( since i am 16 my dad is helpin me get this ready next season for drag racing)
Hooker 6901 fits real good. Right side goes in with no problems. Left side you need to jack the motor up a few inches to get them in. Dont spend the money on Hookers coating, Its not worth crap.
I have Hooker 6901's they fit great. I have the coated headers from Hooker and have not had any problems. But I would recommend that if you want coated headers buy them directly from Jet-Hot, they sell new headers that they have coated for the same price. www.jet-hot.com
I have never needed to jack the engine for any headers I have used, BUT the front of the car must be jacked very high. Dave
If you have access to a lift, chances are you will not have to jack up the motor. If you dont, you probably will. Either way its a definate maybe.
Yes, it is a definate maybe. the 2 V8 mavs I have owned that I put headers on, both had to have the left mount undone and motor lifted a bit. 3 different types headers too. Dan
