Fresh out of paint
bad idle Well. I think your right about the choke. you can test that theory by taking off the breather in the morning and see if the choke is...
I would check the vaccuum hoses under your dash.. The heater controls might be vaccuum operated and one of the lines off or bad.. congrats on...
I also agree with that statement too. Once they drove away, the car and all responsibilities was theirs. When I bought my mav, the guy sold it to...
New members I completely agree with Dan. Couldn't it be possible that the new owners aren't "bad"? That they are just inexperienced and were told...
Jmo My mav has a 5.0 roller and AOD with the "small drum" non-power brakes. As a daily driver I have no problems stopping. I do have to press...
That sounds better than stripping.. will call herculiner..
My mav currently has 86 Hyundai buckets in it. Very uncomfortable.. I just picked up a pair of 98 Ford Contour buckets for 60.00.. At least they...
AAARRRRGGGG!!! I just finished painting my engine bay with that stuff!! Looks really good too.. Well, off it comes.. Thanks for the info, I am...
just thinking out loud.... I think what gives the House of Kolor paint it's effect is that it uses a Base Coat, then a Tinted Clear, then a...
I would estimate: since your pistons are stock and low compression, you could be looking at 250 to 280HP with that cam... approximately, a good...
I must be thinking of another engine then.. thought for sure it was the 170.. I remember I had a straight 6 that had intake bolts with strainge...
Hmmm. the intake on the 170 I used to have came off..???
R.E.M. video R.E.M. is a great band...:clap:... I get goose bumps every time I hear "Losing my religeon" :bouncy:
Dyeing I have a set of grey buckets in mine now that I spay dyed black.. looks good.. I bought the dye at Auto zone.. I am getting ready to put...
That is exactly what I wanted to know.. Thanks The reason I went PPG the first time is they have a very good clear coat. I was going to use...
If you could find the right flywheel to match the engine and trans balance. I don't know of any that do.. would probably have to be aftermarket...
what paint is easier I used BC/CC on my paint job but I just had a guy tell me that acrylic enamel is easier. My question is, does it last as...
could have used that 5 months ago I am getting ready to repaint my mav because of tiger stripe and excessive orange peel. That info will come in...
I am getting ready to put one in my 72. It requires a little mod on the crossmember I believe. I will see if I can get my hands on a C4. I know a...
Separate names with a comma.
