i always use one of these :jack:
did you check all the ground wires underneath?recheck all the fuses.some of them are a bare to see.
got the starter out.hooked up some jumper cables as suggested.turned over fast,but a little weak,tried again,same thing,(bendix is kicking out...
ok my starter has a lifetime warrenty.going to swap that out along with a new selonoid.if that doesn't solve the problem,time to pull all the...
both sets were bought at autozone?
thats what i'm thinking.must have been made on a friday or monday! i normally use cleavite or sealed power,but they were out of stock on both,so i...
main's are:brand,HI-TECH p/n ms590p rod bearings are:brand,HI-TECH p/n cb634p thanks naford.:tiphat:
maybe autozone gave me the wrong bearings?thats my next idea.everything was stamped standard,but you never know with those guys.
don't know about that one when i first went to fire it,the motor would not even move!loosened up the mains/rods and everything rotated...
according to the crappy wrench i was using thats what it read.not sure if it was right or wrong.things have a funny way of happening.
but harbor freight has such quality tools:slap:
jamie,i haven't tried that yet.i pulled all the plugs out and it cranks over fine,like a brand new car.i put the plugs back in,and it,how do i say...
overtorqued to at least 50-55 pulled 2 different bearings,no marring or grooves.i got the engine to fire,ran for about a...
engine was rotated,engine was prelubed,pump was primed,used assembly lube,no plastigauge.
thanks cleaver,the rods are all in their correct bank,and installed correctly.is it possible i killed the main and rod bearings when i way over...
crank wasn't turned,whole engine only had 32k miles,just sat awhile.standard bearings,new rings,everything standard.end gap was checked.valve...
ok i got one for the engine guru guys.rebuilt my engine,set everything to factory specs(torque wise)or so i thought!turns out my buddies torque...
:Welcome: ,many great people here,to help you out!as they say :ttiwwp:
as far as i know all 302's are the same length.sure you don't have a 351 dizzy?
:eek: :rofl2: damn!!
Separate names with a comma.
