Not bad ! But to be honest this car is for my kid and I think maybe the big bumpers may serve a porpose. God forbid it should ever happen but! So...
how do you like the look? got any pics of what that looks like? The big ass bumper in the rear was made for a kenworth, bout 1952 model!
We did the front tuck and what an improvement Now its time for the rear. Is there a set way in which to do this or do you just throw away the rear...
Well for what its worth I can tell you what I paid for ours. First I tell you about it! 250 -6cyclinder,auto,drum brakes,no p/s,good glass,vynal...
Over the weekend we did the front tuck and what a huge diff. in looks. We didnt have a welder so I called a friend of mine who is certified asked...
The boy and I started the front bumper tuck this morning, After some investigation and alot of good input here we stared and finished in no time...
Thanks, I just wanted to be sure. Mitch
so I assume the casting numbers do indicate a 70's series pump?
casting number D7TE My guess is its a 1977 standard rotation. Does this sound right? I want to be sure before we install it. Thanks!
1977 and yes its standard flow? my guess
Yes, D7TE-AA then under that number is 13
Well we have the pump here looking at it it is a stock oem pump. The wster chambers look just like the standard flow pump but the heater hose...
Ill pull the pump off its just mocked up with two bolts,pull the backing plate and check out the impeller. so what it boils down to is belt...
Before We gasket up I want to make double sure we have the right water pump. Is there a way to tell between the reverse rotation and a standard...
Yep thats the one thanks!! :tup:
I know somewhere her Ive seen a discriptive how to on the bumper tucks. Anyone know where it is? Ive done a search and havent found it,or Im not...
Thanks jeff , the boy and I went to the yard this morning and found an ideler pully off of a f-150 that works just perfect! we robbed the slide...
I have a 250 pump pulley w/air that I tested for alignment and it was very close and would work with a small spacer but what concerned me was the...
Thats a good lookin set up too! Pretty clean, Thanks
The pump groove is block side from the alt groove.I think ill look at a diff pulley or end up fabbin a idler. Blue gene has a decent setup, got...
Separate names with a comma.
