Thanks Jeff' Boy and I are going to bone yard on Sat. I WILL look for one. Thanks, Mitch :2thumbs:
ITS YOU !! Nice piece of riggin. Now how about the recipe your majesty.
Thanks, Ill put some thought into it, Maybe use some plate aluminum for the bracket. Make her look good. thanks for the help.
Well I'm the king of fabrication. Some say the king of jury riggin! Ah what do they know! I will fab up a tensioner. what kind of idler pulley did...
No the alt dont line with pump. What would happen if I changed to a two groove pump pulley?I just Measured and it appears the pump groove is 7/8...
Mavman, the balancer bolt on was a success! I was fortunate to have both a 28oz and a 50 oz balancer here so I was able to know for sure I got the...
Is this a possible soultion, Get a belt that fits snuggly from the crank to the pump? no tensioner needed?
The pump pulley only has one groove and it does line with the first grove on the crank but no way to tension it
What I have is a 302 with a 3 groove pulley on the crank. the alt lines and can tension belt , the water pump is the problem because this mav...
Thanks for the info! I could feel a small ridge where the id changes and thought that might be the case , but being a rookie I want to do it right...
Of course as along as I use a 500oz flywheel it should bolt to a c-4 I-6 250 tranny. Yes?
I have a 50 oz crank in a 1980 block. a cam,lifters,pushrods out of a 28 oz engine, distrib. from 28oz water pump of 50oz. Will this engine run...
Ok so after doing the homework I should have done before asking ive found that this is a 50 oz engine it does have the crank casting of 2mae. so...
so is the crank marked or whats the best way to determine weight
I have a 302 with block casting numbers of EOAE. from what I can tell by investigation is its a 1980 bolck wich should be a 28 oz engine am I...
Thanks I think the hookers are the way to go seems as if they are the preferred header. thanks for the summit link. on order! Mitch
Thanks, I thought they might I'm trying to make this swap as flawless as possible. I want to make sure I have everything lined up prior to...
I have a couple of sets of headers but have no idea what there off of other than there for a 302. so my question is will 74 headers fit a 75 mav?...
Thanks all for the welcome, we"ll get some pics up here in the near future it was -28 degrees outside and its though to take decent pics in the...
Been registered on this site before and of course life has its twist and turns that takes us away fom important things like my son and my 75 mav....
Separate names with a comma.
