Well I replaced the water pump, themostat, and the belt now it runs about 205* at cruise speeds and only reached 215* at a red light. It was about...
I watched the lower hose and it it did not collaspe. I also made a spring out of a coat hanger to keep it from collasping. I tried doing what you...
I have had the motor together for about a year, this is my first engine build, I had other issues (learning experiences) that I worked out first...
I have a mild 347: AFR 185 heads, about 10.0:1 compression, the cam specs 240/248 duration @ .050 and .540/.544 lift The radiator is only two...
That is one of the things I hoped it was, this last time I drilled a 1/8 hole in the thermostat to stop air lock from happening. I am changing the...
I started out with a flex hose that had a spring in it, the motor also over heated with it too. The new molded hose doesn't have a spring, where...
Thanks, I have checked the fan several times and it is pulling the air through the radiator, if I put a peice of paper on the front side of the...
My car is running at 220*+ at cruise speeds at times it gets as hot as 240*(maybe even hotter, the gauge stops at 240*). It will stay at about...
What about just drilling the bellhousing and tapping it for the pivot ball. Seems like it would be easier than trying to weld steel to aluminum.
Cool I'll have to talk to my buddy at work that has a welder. Thanks for all the info:thumbsup:
How can this be done with the stock bellhousing? The main thing I don't like about mustangsteve's cable clutch is the cost of the scattershield...
Thanks, I will look into getting a Z-bar from Autocrafters and a ball stud from NPD or mustang unlimited. Then all I have to find is the pedals,...
I thought the engine side ball stud was a maverick specific part, mustang ones are different a different size. If I am wrong let me know, I would...
yes it does
Thanks for the heads up. Wouldn't I still need to find the mount on the engine side though?
Yes I already have the toploader. I would be interested in the pedals if he still has them.
i want to put a toploader in my car. i know that the original clutch linkage can be hard to find so i am wondering what alternatives there are. i...
I have a Airgap intake, demon carb, and a 14 x 3" drop base filter. the airfilter wing nut will just barely touch and scratch the paint on the...
I was going to to do the very same thing before I realized that grabbers are done the other around and decided to do it that way. I believe that...
I had a set of those on my motor, the roller tip rocker arms I was using at the time would just hit them. When I switched to full roller rocker...
Separate names with a comma.
