2 questions..maybe some one has experienced the "want to".. is there a bolt in trans 4 speed trans for an easy bolt in??? has any one found an...
trying to find a starting point to set the screws on new start up..old school was 1 1/2 turns out and adjust from there..the factory blocking caps...
adam send a photo email if you can,,i cannot open attached thumbnails..i had my problem with 302..look for wear shadow on bendix gear and matching...
any way to get a photo of teeth.. 6 cyl or 8 straight drive or automatic..,if the ring gear is just 1/8 wear on the teeth.not a problem...if the...
the longer nose starter worked for my application..it was only 3/8 longer.with 3/4 depth left on the starter hole..factory 3 speed and matching #s...
bought 4 starters for my 74 302 comet...3 speed..nose reach was 3/4 inch short. in the computer were the correct parts,,,i looked at the starter...
any one know the close scale weight of these little flyweight hot rods..
any one have access to online light circut....no headlights,side lights and rear lights..my book briefly mentions breakers in headlite switch..i...
i just want to replace the oil warning light..any advice as to where on the panel or photos of the rear of the panel?? TIA for advise
not working ,,i cked the sending unit and it is good....light bulb out in dash panel..is it hard to change/ck?? access difficult to change /ck the...
thx for the reply..however im not familiar with rock auto..refresh my memory please.,im having a senior moment.
replacing the rag coupling on steering column just behind the steering box any cautions,do i have to unbolt the steering box to get the rag disk...
looking for part# for3 M structual panel adhesive..im planning on trying it on my cowl panel,,some where in this forum is the subject is...
71 comet doors i have a pair in north carolina ..do you have any trucker friends that might pick them up for you??$150 ea
bone yard close by has 2 mavericks,,one comet and one pinto. i have 74 cometGT3 speed and looking to buy a spare rear..im not sure of the ratio of...
seems like the key switch on the column wont return to the proper position to remove the key..i dont see a release button to turn the key to lock...
has any one pop riveted the cowl cover back in place??is the merit of spot welds needed for structual help or just a cover...in my mind i guess i...
i cant seem to find tutorial on sealing cowl pan now that i removed the top vent assy..cowl pan has a few pin holes around the top hats,,any one...
is there any threads to replace head liner? thx in advance for your help!
Separate names with a comma.
