You dont need to change out the whole column. Just get the rear section of the upper collar, where the shifter handle comes out, and put that on...
Try JC Whitney
I have designed LED panels for my Comet tail lights. These 2 web sights will help you understand and build them correctly....
I think you may find any R&P conversion will negate the use of "off the shelve" long tube headers. Shorties should work or there should be amble...
You can check out the rack mount Nick & I came up with using the cavalier rack. The second link is some more info on what I've done. I've already...
That they do!!!! Cant wait to see it under clear.
Any fender can be used however, the 72 and older have a notch in the lower front edge for the stone guard. You can easily fill them with a small...
It is pretty easy to do without a template. Just lay the spoiler across the deck lid and use the studs to mark the center of each hole. Center...
Had fun this weekend turning 2 3/8" solid aluminum into bearing retainers. Had to make 3. One for me and two for Nick. With this set up I can...
Looking great. How soon before color?
Flaming River responded to my email. Quick response. They said any 3/4"DD shaft should fit their universal. They said I could either file it till...
It is done on purpose. The retaining ring is the same way. What you do is assemble them onto the shaft and twist them in opposite directions, then...
They can be a pesky bunch sometimes, especially for perfectionists.
Since they are extremely easy to find, clean, and paint, I wouldn't pay much. Powder coating is way overrated in my opinion. No more than $20 plus...
Hey Dave, does your Allstar shaft fit your flaming river universal?
I sent Flaming River an email with all this information. I will let you know what they say.
I bought the Flaming River universal which is 17mm on one end for the cavalier rack, and 3/4 on the other end. Had to do some light filing to get...
Actually blowing up your picture, it does look like yours only yours looks like it has a sleeve around it. Could you take a picture looking...
Hey Scooper, I just received the CSA204-12 bearing. The outer diameter is 1 7/8". The ID of the end of the steering column is 2 1/8" My bearing...
The very early 1970 model had 4 bolts. Moog part # was K8036 I believe. All the pre 70 Mustangs took the same 4 bolt ball joint.
Separate names with a comma.
