I used that to paint the center spokes of my sport steering wheel, came out decent, too.
:Welcome: From another 70 owner.
Well then, I haven't a clue...
If pulling fuses doesn't show anything that wire also goes to the light switch and the horn. They are protected by circuit breakers in the light...
If you have an ammeter instead of just a light you can see how much current is being drawn. Sometimes provides a clue.
How did you adjust the points? And what did you set them at?
What's next? 347... Seriously, don't just concentrate on the engine, with these old cars modern steering and suspension mods can make a big...
That's the one. They changed the way the article is presented since I looked at it last. The charts used to be located right with the associated...
If I can find it again, thought I saved the link, there's an article on line by David Vizard where he has charts and things that you use to nail...
Some roller cams are designed to be used with cast iron distributor gears. They're generally SADI cores with a different heat treat on the gear.
I've had both problems with mine, bent bolts and torn subframe channel. Been considering using adjustable rod ends/heim joints instead of bolts...
The engine imbalance has nothing to do with the clutch you use. Clutch pressure plates are neutral balanced.
:Welcome: From south central PA.
Make sure it's not just a grounding problem. My gauge acted flaky so I added a ground wire from the chassis to the sending unit, problem solved.
Back when I had a six banger in mine (1973) I had an over-sized Thrush glasspack and then a Y pipe into dual tail pipes. Didn't sound too bad, not...
Preferably a brass drift so you don't make sparks.
I'm 6'6" (or as my son says, 5'18" LOL). My knees fit nicely on either side of the steering wheel. Can someone 5'9" see over the steering wheel?...
Well, you don't want your crank spinning in the oil.
Some come like that, some don't. Just drill a hole all the way through the mount and put 5/16 bolt in there with a nylon locking nut or use a...
Guess you didn't read them all then. LOL. I posted how I shortened the rod one time by cutting 3/8" out of the center and then welding it back...
Separate names with a comma.
