Use the first ones. You'll need fender washers to use with the mount bolts too. The second are too stiff and you'll get vibrations transmitted...
Once you get the vacuum hoses figured out, start it up, get it to idle, then set the initial timing, if that calls for 6*BTC, set it to 10-12*BTC,...
Not sure why you posted this ? The "5.0 Windsor" ? The block was, the heads are Cleveland style. And the HP/torque numbers don't reflect the true...
Anyone have a Granada swaybar they want to get rid of ? And just how much does an aftermarket bar for a Mav/Comet run anyway ?
I bought a Chinese made aluminum radiator for my 77, seven-eight years ago from someone here that had a run made. It's still doing the job, never...
I've been thinking along these lines too, but in cutting the center then welding it back together using a collar to join the ends. This used to be...
Sounds like you could just lower the whole car and still be in compliance. Could also install a larger radiator but also use a fan shroud to cover...
If you're going to continue with the mods, get a Stealth intake instead. It'll work the same on the bottom end, but allow you to make future...
Take the money saved on the high dollar flexplate and spend it on a Pertronix conversion for the ignition. You don't need a 1 pound lighter...
When you tried the Stang wheels, did you also try them on the front of thee car ? If not, then you need to do that too before going farther with...
Yea, and he's got a teenager driving this car. And we all know how teenagers drive. Then add in the "hilly terrain" mentioned. Not a good...
The "ballistic coefficient probably is a lot lower (numerically) than the Camaros and Stangs too as those cars are a good bit "longer" . Mine too...
What you have here used to be commonly referred to as a "Three on the Tree" shifter. They were never "tight" but after 40+ years you probably...
Now it's funny 71gold had issues with my recommendation of the F4TE roller, yet "likes" this. These two cams are so close in specs it ain't worth...
And how will you ever know they picked the right cam for you unless you try something different and dyno both cams ?
Just the fact that you're asking this question says everything. If you knew, then you wouldn't have to ask.
x 2 on the Hedmans. Install them with a quality copper or aluminum gasket and you can toss those old manifolds in the scrap bin. With this type...
And as usual all you gave here was to make a phone call to a cam company rep who may have ben flipping burgers last week. And is likely staring at...
The cam he needs is the stock F4TE roller found in all the Explorer? Mountaineer 5.0's and the 94-97 pickup and van 5.0's and 5.8's. This cam...
Which "72" 351 are you talking about ? Windsor or Cleveland ? The heads are different on the intake side on the 72 351W also, these heads have 2...
Separate names with a comma.
