That reply was sopposed to go under MOJO's question of should the plugs be in or out.
It doesn't make any difference.
An easy way to tell how much slack you have in it, trans in park or nutural if standard, turn the crank pully either way about a quarter turn,...
Use the one that fits the trans you're putting in, may have to have it altered to fit your car though.
So is coolant comming through the hole into the car when the engine is running? if it is, I think there is a freeze plug on the back of the head,...
If you changed the front seal, and it still leaks, then most likely its the pump housing gasket thats leaking.
Have you got all the vacum lines hooked up?
If he switched places with the two small wires it wouldn't turn the engine over when he turned the key. Does the coil you loaned him need a resister?
It could be that the bushing and yoke is gaulded.
Pushing the old bushing in with the new one won't hurt anything, you may hear a slight metal clinking sound when driving show, but why don't you...
The guy is pulling your leg, any trans shop worth walking into has the tools to pull and replace that bushing with the tail housing on the trans....
When you pull the driveshaft look at the yoke real good, it may be gaulded from turning in the bad bushing. And yeah, you need a special tool to...
When my uncle was doing brake work, he said rebuilt shoes were sprung, and didn't give as good stopping power as new ones. He had a shoe archer,...
Depending on what you've got for an engine, and how big of a show you want to put on around town, 4.10s will get you lots of attention, lots of...
You can change the cam and lifters like you want, gotta pull the balancer, timing cover, dist, intake, fuel pump and valve covers. You can also...
Like you stated in the first post, the converter drain plug could be where it shouldn't, and tightning the 4 nuts would distort the flywheel. You...
The torque converter will slide out a little with no problem, but if you pulled it out more than an inch and turned it, theres a good chance the...
On a lot of those 6 cyl as well as V8s, that heat pipe runs all the way through the exhaust manifold. It sticks through about an inch, your choke...
Go out after its sat over night, remove the air cleaner, the choke butterfly should be completly open. open the throttle part way, if the...
Depending on the year of your mustang, the engine could be a 2.6 or 2.8. We never had any problems with those carbs other than the normal things,...
Separate names with a comma.
