I used to buy from D C when I was in the mustang parts buss 17 years ago but have no buss license now, might be a good part time venture for a...
You can pound/tap on the starter relay to make it stop sometimes. I would check all connections for ground and positive cables like replacement...
I think Daniel carpenter reproductions make it so they may have a website to order it from!
Top Dead CENTER. You watch the intake valve open on number 1 cylinder and you should be close. Look for the marks on the damper the front pulleys...
I had a wrist pin break on my olds diesel years ago 20k after what I thought was a complete rework- come to find out they needed rebushed. wes
I could use a heater/defroster control plate from a 76 and a good lower dash with all parts from a 74 and the 2 small filler pieces at the rear...
I also used shelby t/l panel and bezels and lenses on the rear with a 65 stang rear valance and a 71-73 rear bumper and brackets along with a...
What I had to do to use the mustang louvers is to cut off 3 slats worth and then they didn't cover the stock rear window opening so I used a kit...
Hey Groberts, I can only send 1 or 2 pics per email, I sent rayzor some, my phone service is soo bad but im cheap so I put up with it. Wes
I took a used pair from a 2005 mustang, not metal and cut them down and mounted on mine and also boxed in reAR QTR WINDOWS AND PUT LATE MODEL...
Whitewall tire cleaner is what ive always used. wes
3 butterfly scoop have one of those scoops that was on mine when i bought it-almost new-dont want-anyone want or need one before i take it to a...
Separate names with a comma.
