I don't know if this another re-count or an initial counting of NEW members but, YES, I own and am restoring/modifying a 1971 Mercury Comet 2dr,...
Had Y'all tried ACETONE?
<p>Picked-up a '68 302 and a spare C4, will tear-down the 302, boil-out the block, check the bore diameter and out-of-round and have it rebored as...
C4 Bell Housing Thank You, I assume the I-6 170 and 200 will also interchange. Is there any differance in the transmissions themselves from the...
C4 Bell Housing I was told by a local Ford Dealer mechanic that the I6 250 and the V8 Windsor would interchange. I've got one of each, I'll...
Replaced : Hood Latch, Trunk Latch and lock cylinder, Both door lock cylinders, Steering column with Ignition Key cylinder, Turn Signal Switch,...
terminology Automatic transmisions require FLEXPLATES and standard transmissions require FLYWHEELS (FYI). I've got two (2) flexpaltes, one (1)...
To: Big From: kafrompa subject: Flex Plate/Flywheel Which one do you need? the Flywheel or the Flex Plate? and which engine do you have? I may...
Flex Plate To: 71Gold From: kafrompa subject: Flex Plate/Flywheel Which one do you need? the Flywheel or the Flex Plate? and which engine do...
Work on the Comet has come to a HALT, (1):the wifes employer lost a contract and she stays home 24/7 for now, (2): my tractor's engine locked-up...
Congradulations! Congradulations!, Back in service. If there is anything I (in an Amsoil capacity) can do for you, just let me know..."Garv"...
Oil Filter Clearance Do You know any one that deals in Amsoil products? Check the dimensions of the Amsoil EAO11 engine oil filter, same...
Do any of Y'all know of a good interior shop in the central Texas (Austin) area? I'll be needin' my front Bucket seats re-covered...kafrompa
Pushrods I just checked the two (2) pushrods recommended for the K31-238-3 cam kit that I intend to use, they are the 7831-16 (6.881" X 5/16")...
Pushrods I'll probobly go through Summit, I've got an account there for a while now...Thanks...Garv
Pushrod ID OLERODDER...Thanks for the suggestion, where can I get this Pushrod tester? You reckin' Comp Cams or Summit sells them or just a local...
So the ENGINE serial # is behind the head, foward of the bell housing and above the starter on the RIGHT side (passenger side) of the engine....Thanks
The engine has got a set of the cast aluminum roller rockers, NOT stock rockers and the guy I bought it from said that it wouldn't idle down well,...
Where is the engine serial number on a 1968 302? I'm having trouble finding the right pushrods for that engine? Any of y'all know where to look...
Mav71 If you need a steering column I've got one that needs the top end rebuilt including the key, lock cylinder and the cast collar they mount...
Separate names with a comma.
