Adjusted my timing by a tooth on the distributor and apparently, it wasn't the right thing to do. Doesn't want to easily start now and drew down...
Finished with the linkage bracket and no down to this electrical. This electrical issue is the only thing getting this car on the road at this...
This particular wire is the light blue wire off of the ignition switch harness. I get nothin/zero off of the red w/green stripe coil feed wire. I...
With just pins 85 and 86 connected, my trigger wire supply reads 7.25v steady. It used to read 12v when I first located that wire. Have I done...
Yes, battery is fully charged and showing 12v or slightly better. Charging system is working properly and pumping 13.4v when running. Battery is...
All I need is a trigger wire to run three relays. Every wire that I find switched drops to 5-8v when loaded. Am I just looking for something that...
This is exactly how I have the relays wired. The problem I'm having is the wire I was told and found off the ignition harness drops like all the...
The one I found is light blue. As I mentioned, the puzzling part is once its loaded, along with every other wire I have found that has a + voltage...
I'm going to attempt to raise this from the dead.... I'm in the same situation. I need a 12v switched lead to run a electric fuel pump, efan, and...
Just out of curiosity, does anyone know if inverting the headers will work. As in the outlets would be forward facing? If they would clear the...
So I've found another set of reworked GT40 heads (new OEM springs and resurfaced and cleared by a local machine shop to be good). Based on using...
See, that's what I'm seeing here, the longer I hang out. All of you just trying to help folks. Really appreciate the input. I've found a set of...
What I was meaning was to take the heads off of the 71 302 to the shop to have them worked. Then mount them to the later model 302
Yes, they would as long as they are within my son's budget. The car has been down now for a few months because his original 302 began using as...
I have a 2000 model 302 out of an Explorer with the GT40P heads. I am planning on putting this engine in my son's 71 Grabber Maverick. Obviously,...
Separate names with a comma.
