so what all is involved in swapping in a 5 speed out of a late 80s mustang? my car used to be 3 on the tree so i still have the clutch pedal. what...
it is a big gap but it seems to be firing them just fine at the moment, i guess time will tell
also the old dizzy was a single points type unit not a dura spark. and that is the unit that is in the car now. it is basicaly a stock chevy hei...
ok i gapped 4 new plugs at .055 and put in to replace the affected cylinders last night and swappwed the carb from my brothers truck ( a known...
Ok ill answer these in order... 1. 600cfm edelbrock performer 2. i have them set at 1-1/2 turns out 3. i have no timing tab, but it is set at...
http://cgi.ebay.com/ebaymotors/FORD-SBF-351W-V8-DISTRIBUTOR-HEI-BILLET-NEW-NIB_W0QQcmdZViewItemQQcategoryZ33690QQihZ008QQitemZ180112194137QQrdZ1QQs...
i have been running nothing but super in it and still probs, i started pulling wires and 3,2,5,8 are firing sparaticaly, the others are steady. i...
ok back again with some problems..... first off, it is not idleing very good at all, and it backfires through the carb and exhaust when getting...
I am getting ready to put on some msd super 8.5 wires and am trying to figure out how to route them on my 351w. post up your pics!!
it is just a hummm, even when the car is turned off. i pick up power from the starter solenoid post with a 2gauge wire, to a 1.5farad capacitor...
ran a ground straight to the battery to no avail. HELP!!!!!!!!! this is extremely annoying!!!
ok well me and the family are moving into a new house, so funds are tight for the next month or 2, how many of you are successfully running...
got an anoying ZZZZZZZZZZ sound coming from my stereo even when the motor and ignition is off, power and rca wires are ran on opposite side of the...
im located in eastern oregon, real nice guy though
I asked him how much it would be without the X in the system, he said minus $25 he is gonna give it to me at his cost and said $35 for each...
Well i got it to another shop, he said he was a little worried about going over the axle so i told him i could bring in pics, he quoted me $350...
Well i finally got the mav insured and registered. its a good feeling to be driving it agian. i currently have 2 pipes that go off the headers...
although it is just a cruiser i dont really want to smell exhaust, i guess ill just go with some sort of a flowmaster, i hear the guy here in town...
no modifications, looks factory, no crimps, its a 71 if that makes any difference, so all i need is some from a later year? if so does anyone got...
Separate names with a comma.
