Thanks guys, I'll make sure to put more fluid in, and as for the torque converter i made sure it "thuded back" as you guys say. I had read of...
Thanks, Figured it was the tranny, I guess I didn't phrase my question correctly... Where on my tranny, or what in my tranny would cause this to...
I recently go the engine running after the small problem with it not turning over at all. There is a new problem however, with the back wheels up...
Yeah, it was a crappy ebay re-build and the bendix (sp?) wasn't engaging. Bought a reman at autozone, no problems, cranked the engine and now have...
Well, its probably got all of 40 degrees of motion either way before it stops, I will try the tranny thing though, that sounds easy enough, I did...
Alright, went out, and tried to turn it the other way... It does! but it won't get past around 22 degrees btdc according to the balancer... Piston...
How would a torque converter not be seated all the way? How would I check, its an fmx, and it's not a new converter, there looks to be the...
No, didn't think to do that, why? would it possibly loosen it enough to turn it the right way? Is it just tight from the rebuild? thanks for the...
E7te heads, hypereutectic (sp?) pistons, plugs are out, and a summit knock-off cam, compression should be right around 9:1...
It's an i-6 to v-8 swap, the engine is freshly rebuilt, so, not real sure when the last time it turned was, but during rebuild, checked spin...
Took out the plugs and tried to turn it by putting a socket on the crank bolt, and cranking it with a 6ft breaker bar, and proceeded to shear an...
The starter problem is fixed, bad starter, bought a new one at Kragen, but now, the engine will not turn over, when the starter engages, the...
bumpity
I bought a new starter for my V8 swap, it's a mini high-torque starter, and it has three posts. Two big and one small, on one of the big posts,...
Thanks for all of the responses guys, I have one of the ready to run ones with the ignition module built in, so all it needs is the coil, I...
Bumpity
I did go to msd online, and I know how to wire it up, I just need to know the color of the wire I need to use, I'm trying to track down the...
I have an msd ready to run distributor, and need to figure out how to get it wired up. As far as I can tell, all I need is to figure out which...
So I have a 302 with a FMX tranny what kind of starter should i get, oh and will running head muffler just for like a month do any damage to the...
very good to know, thanks guys
Separate names with a comma.
