Yap, the NEW ticking sound originates from the damper, checked that it doesnt rub against radiator hose clamp, seems to be something else,...
changed to 15W/40 this morning full mineral, got 40 psi at 3000 rpm and 28 at idle!, no smoke and humming nicely, ( then again another sound...
Thanks for the advice everybody...,
what is the usual practice in jet changing when installing open "strip" exhaust for the weekend racing, up or down sizing?carb is carter AFB, ford...
swapped to a new standard pump yesterday... ticking valve sound is gone now! so it seems that the pump was the culprit, developed a nasty leak...
unknown total runtime on motor, everything seems tight underneath, replacing the original pump with a new standard flow pump today, gonna use the...
Thanks for the advice, pulled the pump , seems like been scraped a bit against the cover plate but okay otherwise, no binding etc, "valve" ticking...
Could use some advice what to look for, oil pressure wount go above 20 psi anymore, when cold goes to 40-50 for a few moments, ticking sound from...
Found out during flushing and cleaning that my current rad contained quite a lot "brown" stuff, car has been standing for a while and did not keep...
floor shifter, car used to be column/6 cyl, now 302, starter will not engage, i believe one of the cables from shifter should connect to ignition...
Could use some advice on how to connect electric cables for Hurst shifter on C4, anywhere to download ?, hurst homepage does not offer any...
Thanks again, this cleares my mind anyhow, pertronix hard to find here though, might need to settle for MSD ...
thanks for the replies, have not checked but like in a harley, two points might mean two "humps" on the shaft and maybe therefore suspicious...
Found out that my newly acquired mav has double points distributor ?, local shop says cannot update to electronic/pointless system , only single...
Separate names with a comma.
