WO HOO!!! PROBLEM SOLVED Yes I thought that the intake might have a crack in one of the runners too, so I steam cleaned it and was giving the...
Ok Sorry I am still bugging every one, But I have not yet figuried this one out . I still have a problem !! So here is what I have done...
Hey there Paul Both lines are hooked up at the Tranny side. ( c-4 ) I am just not sure where to hook them up on the engine side One is...
Earl I have two lines that go to the tranny vacuum modulator one is hooked to the intake and the other is not hooked to any thing ,Any ideas...
Thanks everyone Tomorrow i will get at it again , had to quit when the sun went down tonight . The link Thomas posted was great. The bad news is...
Ok I was having a problem with a unsteady idle so I rebuilt my Carburetor ,( which had a bunch of crap in it ) BUT still have a problem. So I...
Hey guys my 74 has two Vacuum lines side by side . one comes off the intake manifold and the other is not hooked at all ?? Where should it Go????
Hey olskool I just read the tech article on 2bbl conversion and I might give it a try next spring. Right now I am gong to rebuild my old one...
Thanks Jeff I just finished taken my carb off the car . It looks like I need to rebuild it, there was a fair amount of rust Inside the carb ,(...
Hey Guys I have a 74 Mercury Comet 250cu engine "single barrel carb " and there is a electric solenoid switch that holds the throttle plate open...
Ok everyone . problem solved , thanks for all the help. Your the best!!!!! Danielle On the road again .WoHoooo!!!!!!
[ http://mmb.maverick.to/showthread.php?t=49782&highlight=spring+conversion I plan to use it to beef up mine soon. you could probably compare the...
yes I thought about that and it may be so . But I just went to General springs web sit and they list the there measurments at a little over...
My 1974 Comet is in need of new rear Leafs. So I called the local spring Co ( palmer spring in Portland Me ) and they said they had some in...
Thanks Dave I am headed out to put the inspection plate on and call it good with just a new pan filter and gasket.
1974 C4 auto/ Comet . Does anyone know if the converter has a drain plug on it i would like to do a complete tranny flush I took the inspection...
Timing which Way ? Thank you captain Comet for your help . I agree about all the Vodoo stuff in the early 70s they were just throwing stuff...
Yippee !!! my parts finnally showed up and te weather warmed up enough for me to work out side So I got my comet up and running for the first...
Yes `the price of scrap steel is at a all time high . Thats one of the reasons that the junks dont have very many old 70s vehicle's they found it...
Free shipping on a Hevey item like springs is always a good incentive .Two inches of lift would be perfect for my rig . We just got hit by snow...
Separate names with a comma.
