Hydraulic Clutch Kit for T5s or Tremecs

In the process of creating and installing a Hydraulic Clutch Setup for my '70 Maverick T5 tranny. Already have one for the Comet with the Tremec. I plan to market the kit for our type cars and other FORDS in the near future. There are a few kits already out there but the kit I plan to offer I feel will be one of the Best of
the group. With the CAMEO Kit you just have to drill and tap one hole in the block which will be referenced
when the bracket is attached to the bell housing . The all important " pivot-point" will be predetermined and will be trimmed to accommodate the install. If anyone is interested in this setup in the future lemmeno.
Cometized
(Chip)

 

Duh !! With the kit you don't have to drill a hole in the " Block" ... Its in the Bell Housing ..sorry bout dat !
Cometized
( Chip )

 

Would it fit my Lakewood bell housing?

 

The kit we're designing is for a STOCK setup with a stock bellhousing . Most of the kits out there have the same
specs.
Cometized
(Chip)

 

I thought I couldn't use a stock bell housing with a tk600.

 

There is a Stock " Style"( Cast Aluminum) Bellhousing available from FORD RACING the part no.# is M-6392-R58 ..You'll have to
check them for pricing . You might also try " Quick-Time"for a Scatter Shield Type for a price . We have already tried a Lakewood Bell Housing and had "major" tunnel and floor clearance issues. Hope this helps.
Cometized
(Chip)