Power Steering Pump

Discussion in 'Technical' started by BRIAN BRANHAM, Jun 21, 2004.

  1. BRIAN BRANHAM

    BRIAN BRANHAM New Member

    Joined:
    May 28, 2004
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    0
    I Recently Installed A 71 Model 302 In My 73 Maverick.the Motor Has The Power Steering Pump But My Car Doesnt Have Power Steering.since The Water Pump Belt Is Tensioned With The P.s. Pump How Can I Get Rid Of The Pump And Still Cool My Engine.any Info Will Be Greatly Appreciated.thanks,brian
    Is Anyone Going To The All Ford Show In Pigeon Forge This Weekend?
     
    BRIAN BRANHAM, Jun 21, 2004
    #1
  2. littleredtoy

    littleredtoy Seth

    Joined:
    Apr 27, 2002
    Messages:
    4,050
    Likes Received:
    15
    Trophy Points:
    162
    Location:
    North Carolina, Triangle Area
    Vehicle:
    '74 Comet GT
    Pulley swap

    You are going to need to swap your pulleys.
    I take it that you don't have A/C.

    IF you do, I don't think that there will be a
    pulley setup for a car without PS but with A/C.

    You will need a lower pulley and possibly a water
    pump setup off of a 302 with no A/C or PS.
    You can probably use these off of any Ford setup
    with the groove belt setup.

    Seth
     
    littleredtoy, Jun 21, 2004
    #2

Share This Page