Posted by M.A.V. on March 02, 1999 at 23:45:53:
In Reply to: Re: Differences in v8 mavs posted by Dave on March 02, 1999 at 22:30:15:
: YES the bolt holes are there for the crossmember .
YOU NEED TO FIND A DONER CAR (FACTORY V8, ANY YEAR) TO GET THE BRACKETS THAT THE MOTOR MOUNTS BOLT TO, THE TRANSMISSION CROSSMEMBER, THE THROTTLE CABLE, AND THE BOLT IN CROSSMEMBER FROM , ALSO GET THE FRONT COIL SPRINGS. (IN CASE THIS BOLT IN CROSSMEMBER THING IS PUZZLING YOU, CRAWL UNDER YOUR CAR AND LOOK AT THE FRAME RAILS BETWEEN THE BACK SIDE OF THE SHOCK TOWERS AND THE FIRE-WALL,YOU SHOULD FIND A LARGE THREADED BOLT HOLE ON EACH FRAME RAIL) HOPE THIS HELPS! M.A.V.