Posted by Russ (IP: 166.62.66.232) on June 29, 1999 at 22:31:50:
In Reply to: coil springs posted by Justin on June 27, 1999 at 21:48:42:
I wouldn't use I6 springs for a 351w. Too much of a chance the car will sway in simple corners, and the tires could even rub the body in the front. The 351 is boviously much heavier than a 6 cyl. Cutting the springs is your risky but worth a try if you have others as backups.
: ok here is my question i have a 351w built and ready to put in my 74 mav but i still dont have any coil springs, i want to cut them for a
: 1 1/2"- 2" drop but i dont want the ride to be too harsh and i was just wondering if i could use I6 springs cut 1 coil or should i use 302 springs cut 1 coil.
: thanks