Posted by TParker (IP: 4.33.1.93) on September 27, 1999 at 11:31:06:
In Reply to: Hedman 88650 posted by Aaron S. on September 27, 1999 at 01:25:43:
Will those work with a 302 or will they hang down too far under the car(you know 351 taller deck highth and all)?? Only reason I ask is that I have 351 heads on my 302 and they have larger exhaust ports than the Hedman 302 headers that I have on it now and I'm having a hard time keeping a seal on the gaskets. The heads have rectangular ports and the headers have oval ports that are smaller than the rectangular ones at the corners and all of the gaskets I get have rectangular openings on them so there is not a good seal. If anyone has any ideas on how to make this work, without having to buy new headers, please let me know.
: Not that is has not been said 100 times before but I would just like to confirm to whoever is doing 351w swaps that the hedman swap headers for the 64-68 mustang part number 88650 with the 1 5/8" tubes and 3" collector do fit, very tight but they do fit.
: A.S.
: #4
: Area351@aol.com
: : I have a 70 Maverick , I just installed a 302 and I am wondering if Tri-Y headers made for Mustangs will fit?