Posted by Butch (IP: 205.188.193.156) on January 28, 2000 at 14:50:14:
In Reply to: Mav won't run posted by Alison Casey on January 27, 2000 at 20:32:24:
Alison, I'm not much of an expert like a lot of the folks on this board but I will offer the experience I had with my Mav. It started acting like you describe your problem and it turned out to be a problem with the carb sealing around the base. It was sucking air so had to replace the gasket and then it ran fine. Good luck. Butch